Marking Chalk Spraypaint

Marking Chalk is designed to temporarily mark most paved surfaces, soil, and grass. Use for utility marking, construction sites, surveying, landscaping, and athletic field marking. Uses advised against: This aerosol product is designed to spray upside down or at an angle not greater than 30° from vertical. Use caution if surface is wet, or if rain is imminent within 4 hours of application. Do not apply additional product until the previous coat is dry.

Colours available on order are:

White, Blue, Red, Orange, Yellow, Green

Size: 425 grams

Features: A unique, temporary, water-based marking chalk. This product is safe for use at all construction, utility, and survey sites. Aervoe Water-Based Marking Chalk is packaged to operate upside down by hand or in an Aervoe Spot Marker #244, or Marking Stick #245 applicator with or without the cap on.

Benefits: This product is a true water-based formula, not “water added” for cost reduction formula. It is covered by its own U.S. Patent #5,158,069. Adhesion is provided by non-resin binders and low pigment solids in a slurry that holds the chalk together as the mark dries. It is a fast-drying chalk designed for temporary marking. The mark will naturally disappear with water, traffic, or other abrasions.

Uses: Aervoe Marking Chalk is designed to temporarily mark most paved surfaces, soil, and grass. Use for utility marking, construction sites, surveying, landscaping, and athletic field marking. For golf course marking, use Aervoe Water-Based Turf Marking Paint. For aisle striping in warehouses, parking lots, or traffic lines, use Aervoe Striping Paint.

Application: Shake can for 1 to 2 minutes after rattle agitator ball is heard. Remove safety tab, invert can, and apply 3 to 4 inches from the surface for writing symbols and numbers. Apply 5 to 8 inches from the surface for 3/4″ line or continuous direction tracks. Product will appear transparent when first applied; full opacity is achieved in 3 to 5 minutes. Keep can in motion during use to prevent puddling due to high delivery paint stream. For best results, use at temperatures between 50° and 80°F (10° and 27° C). If cap has been removed, replace it for storage and color identification. Clear spray tip after each use by turning can upright and spraying for 2 to 3 seconds.